Click here to buy on eBay!

Assorted 8 pcs of
125mm 5″ wet diamond marble polishing pads (2.8mm thick) with pad holder. They
are excellent quality and velcro backed pad in grit 50, 150, 300, 500, 1000,
2000, 3000 & black buff. 1 piece in each grit, total 8 pcs. Suitable for
polish the marble, granite or concrete, etc ……

About the pad holder,
we have 5/8″ inch thread or M14 thread for you to choice. We will ship 5/8″
thread holder if we haven’t receive any notice from buyer (if you need M14
thread holder, please write PAYPAL message when you settle the
payment by paypal).

We’re proud to introduce to you this 5 ”
High Quality Granite & Marble Polishing Set. For use with Granite and
Marble. This set comes with a total of 7 pads and a 5 ” velcro backer pad(5/8″
thread). They are 5 ” in diameter. **Don’t be fooled by other cheap polishing
pads that can’t compare to these.**

This set includes the following items: 50
grit, 150 grit, 300 grit, 500 grit, 1000 grit, 2000 grit .3000 grit and 2
(40x40cm) Microfiber towel. This set comes with 7 pads and also the backing for
the pads.

These pads are to polish Granite or
Marble stone. You can make a nice smooth finish for your stone.

These pads are a great value. Where else
can you get this price for these items. To buy this from a store or a
distributor would cost over $180.00 for all the pads. But you get all this for a
great price.

You get a free 5 ” Velcro Backer:**(fits
standard 5/8″x11 threaded angle grinder,if you need Thread of M14 OR M16 ,please
let’s me know first ,so that i can sent the corret one to you
)

Here is some additional
information:

Our’s polishing pads are designed to
achieve a monument quality finish on all straight or shaped surfaces. The unique
design of the polishing pads allows for rapid and even removal rates with
minimal effort. When used correctly, these pads provide a clear advantage over
all other polishing methods. **(Max. RPM for the pads is 4500)**

Polishing Steps:

Cut or shape material to the desired
surface or pattern using either a diamond blade or diamond cup wheel.

Using a clamping device, secure material
to be polished to a proper work surface.
Remember, polishing is a process which
takes time and requires that each grit size pad be used properly to achieve a
quality finish.
Using the 50, 150, or 300 coarse grit
pad, remove all rough scratches and cut marks. Smooth the surface as much as
possible with these specific grit pads. The smoothing of the surface during this
stage of polishing will determine the quality of the finish that will be
achieved. After working the area, dry the surface to determine if all large
scratches have been removed. Using a lumber crayon or pencil, mark the surface
to determine the depth of the scratches remaining.
Once all large scratches have been
sufficiently removed, the finer grit pads can be used to achieve the quality
finish. The fine grit pads consist of 500, 1000, and 2000.3000. If more luster
or color from the polished surface is desired, use the extremely fine 5000 &
8000 grit pad.

The surface should have a high
luster or finish. If the surface appears to have small scratches, repeat step 5.
In some cases it may be necessary to repeat steps 4 & 5.

Important
Points in the Polishing Process: • Our polishing pads are designed to be
used solely with water to minimize the wear on the pads and prevent dust. (The
use of water acts to cool the polishing pad material, flush away grindings, and
eliminate dust). You can use our dry polishing pads to polish the stone with now
water. Always wear eye protection at all times. • Never skip grit sizes
during the polishing process. Skipping grit sizes will result in an
unsatisfactory finish to the stone. • Diamond polishing pads wear out
prematurely due to the overworking of the material or by not using a sufficient
amount of water. Do not use an excess amount of water. • Failure to spend
adequate time polishing with each grit size pad will result in an unsatisfactory
finish. • Use a 5 ” Diamond cup wheel to plane down uneven surfaces and
knock off saw nubs.

ZFE STORES specialized in wide range of Car Care Products .Polishing Machine .Power  Tools .Air Tools. diamond tools, nuts & bolts, bits, saws and machinery etc.  Our  products are quality assured according to the advanced technology  applied and strictly control the quality of raw materials.We supply many of the main stream Construction Companies right here in China .Hongkong and Worldwide. Our products are in use at many of the larger projects such as, the airport and Beijing National Stadium .

We will send out your order within 1-2 days after payment has been received and cleared. Please let us know if you are looking for other accessories or hardware. Should you have any queries, please contact me directly.We are pleased to offer combined shipping on multiple orders. All parts and Acesstores in our Shop are Free Shipping . Please check my store for more items and quantity. Thank you for looking.ZFE STORES   http://www.zfe-tools.com/   http://stores.ebay.co.uk/zfestores

(You Can Add  Items Below To Order, Without Extra Shipping Charge!!!!!)

Click here to purchase today on eBay!

Top Selling Bricklayer’s Tools – Available NEW at AMAZON

Tags: building supplies, concrete

This entry was posted on Wednesday, September 8th, 2010 at 11:11 am and is filed under Bricklaying. You can follow any responses to this entry through the RSS 2.0 feed. Responses are currently closed, but you can trackback from your own site.